Threaded stud S-BT-MR M10/15 SN 6 OGL
Article number: 2205156
Threaded screw-in stud made of stainless steel for multi-purpose fastenings on painted steel. The stud allows fast and easy single-operator installation with battery power onto coated steel base material. There is no through penetration and no rework of the coating required. Minimum base material thickness 6 mm. The system holds the relevant approvals for offshore and onshore environments and is suited for use in highly corrosive environment. Supplied in a box containing: 100 x S-BT-MR studs, 1 x stepped drill bit TS-BT 5.5-74 S for carbon steel, 1 x check gauge and IFU (instructions for use)-manual. Please order OS anti-vibration flange nuts separately (#1371973).
| Name | Value |
|---|---|
| Weight (kg) | 0,0 |
| d Diameter (mm) | 10 mm |
| Material composition | Stainless steel |
| Base materials | Steel |
| Minimum thickness of base material (steel) | 6 mm |
| Thread diameter | 10 mm |
| Tightening torque | 8 Nm |
| Environmental conditions | Highly corrosive |
| Fastener shank diameter | 5.8 mm |
| Corrosion protection | Stainless steel, equivalent to SS316 |
| Washer size | 12 mm |
| Point type | Blunt tip |
| For use with | SBT 4-A22 |
| Max. tightening torque | 8 Nm |
| Name | Classification | Size |
|---|---|---|
| Certificate | 40 KB | |
| Certificate | 424 KB | |
| Certificate | 198 KB | |
| Certificate | 482 KB | |
| Certificate | 137 KB | |
| Certificate | 162 KB | |
| Certificate | 200 KB | |
| Best Practice | 22152 KB | |
| Technical article | 2478 KB | |
| User Guide | 54574 KB | |
| Certificate | 2766 KB | |
| User Guide | 835 KB |