Starter Mekano 50-2T ST-WD-200 HDG
Article number: #1300293/Hilti number: #2257312
Welded starter bracket for Mekano channels 50-2 and 50-2T. Also used for piping installations when combined with triangle channel with square holes.
Available in three lengths: 125mm, 200mm and 300mm. Note: Starter bracket in 125mm length is not suitable for Norsok painting regulations. Note for HDG material: These starter brackets are partly galvanized. Approx. 20mm for type 125 and 40mm for type 200 and 300 is left free from zinc galvanizing to allow the bracket to be welded to the structure. Note for CS material 300: Neither edges nor bolt holes are prepared for surface treatment - must be carried out on site as necessary.
The starter bracket is partly galvanized. Approx. 40mm is left free from zinc galvanizing to allow the bracket to be welded to the structure.
Product variants
Filter product
82211
Starter Mekano 50-2T ST-WD-125 SS
1371698
Starter Mekano 50-2T ST-WD-200 SS
1371699
Starter Mekano 50-2T ST-WD-300 SS
1300292
Starter Mekano 50-2T ST-WD-125 HDG
1300293
Starter Mekano 50-2T ST-WD-200 HDG
Selected
1300294
Starter Mekano 50-2T ST-WD-300 HDG
82210
Starter Mekano 50-2T ST-WD-125 CS
1302514
Starter Mekano 50-2T ST-WD-200 CS
1302599
Starter Mekano 50-2T ST-WD-300 CS
Characteristics
| Name | Value |
|---|---|
| T Material Thickness (mm) | 6 |
| Weight (kg) | 1.010 |
| X (mm) | 61 |
| Y (mm) | 200 |
| Z (mm) | 61 |
| CC (mm) | 50 |
| Hole size A | 11x35 |
| Hole size B | Ø25 |
| G Deburring (mm) | 90 |
| Type | Welded Starter |
| HEXAGON S3D | YES |
| ETIM class | EC000896 - Ceiling bracket for cable support system |
Downloads
| Name | Classification | Size |
|---|---|---|
| User Guide | 347 kB | |
| User Guide | 328 kB | |
| User Guide | 382 kB |
