Threaded stud S-BT-GF M8/7 AN 6
Article number: #2140527
Threaded screw-in stud made of stainless steel / hot dip galvanised for grating fastenings on painted steel. The stud allows fast and easy single-operator installation with battery driven tools onto coated steel base material. There is no through penetration and no rework of the coating required. Minimum base material thickness 6 mm. The system holds the relevant offshore and onshore approvals and is suited for use in highly corrosive environment.
Threaded screw-in stud made of carbon steel for grating fastenings on painted steel. The stud allows fast and easy single-operator installation with battery driven tools onto coated steel base material. There is no through penetration and no rework of the coating required. Minimum base material thickness 6 mm. The system holds the relevant offshore and onshore approvals and is suited for use in mildly corrosive environment. Supplied in a box containing: 100 x S-BT-GF studs, 1 x stepped drill bit TS-BT 5.5-74 S for carbon steel, 1 x check gauge and IFU (instructions for use)-manual. Order application appropriate grating fasteners separately.
Product variants
Characteristics
| Name | Value |
|---|---|
| Weight (kg) | 0.010 |
| D Diameter (mm) | 8 mm |
| Type | Threaded stud S-BT |
| Application area | Grating fastening |
| Material composition | Carbon steel |
| Base materials | Steel |
| Minimum thickness of base material (steel) | 6 mm |
| Thread diameter | 8 mm |
| Tightening torque | 8 Nm |
| Environmental conditions | Mildly corrosive |
| Fastener shank diameter | 5.8 mm |
| Corrosion protection | Duplex coated |
| Washer size | 10 mm |
| Point type | Blunt tip |
| For use with | SBT 4-A22 |
| Max. tightening torque | 8 Nm |
| Diameter (mm) | M8 |
Downloads
| Name | Classification | Size |
|---|---|---|
| Certificate | 41 kB | |
| Certificate | 434 kB | |
| Certificate | 202 kB | |
| Certificate | 494 kB | |
| Certificate | 140 kB | |
| Certificate | 165 kB | |
| Certificate | 205 kB | |
| User Guide | 1 MB | |
| Best Practice | 23 MB | |
| User Guide | 3 MB | |
| User Guide | 794 kB | |
| User Guide | 183 MB | |
| User Guide | 56 MB | |
| Certificate | 3 MB | |
| User Guide | 997 kB | |
| User Guide | 3 MB |
Accessories(11)
-
Threaded stud X-SEA-R 30 M8 adapter
-
Grating disc X-FCP-F 5/10
-
Grating disc X-FCP-R 5/10
-
Grating disc X-FCM-M 25/30
-
Grating disc X-FCM-M 35/40
-
Grating disc X-FCM-R 25/30
-
Stepped drill bit TS-BT 5.5-74 S
-
Grating disc X-FCM-R 45/50
-
Grating disc X-FCM-R 1 1/4
-
Depth gauge S-DG BT M8/7 Short 6
-
Depth gauge S-DG BT M8/7 Short 6
