Threaded stud S-BT-GR M8/7 SN 6 AL
Article number: #2140742
Threaded screw-in stud made of stainless steel / hot dip galvanised for grating fastenings on painted steel. The stud allows fast and easy single-operator installation with battery driven tools onto coated steel base material. There is no through penetration and no rework of the coating required. Minimum base material thickness 6 mm. The system holds the relevant offshore and onshore approvals and is suited for use in highly corrosive environment.
Threaded screw-in stud made of stainless steel for grating fastenings on aluminium. The stud allows fast and easy single-operator installation with battery driven tools. There is no through penetration and no rework of the base material required. Minimum base material thickness 6 mm. The system holds the relevant offshore and onshore approvals and is suited for use in highly corrosive environment. Supplied in a box containing: 100 x S-BT-GR studs, 1 x stepped drill bit TS-BT 5.5-74 AL for aluminium, 1 x check gauge and IFU (instructions for use)-manual. Order application appropriate grating fasteners separately.
Product variants
Characteristics
Name | Value |
---|---|
Weight (kg) | 0.010 |
D Diameter (mm) | 8 mm |
Type | Threaded stud S-BT |
Application area | Grating fastening |
Material composition | Stainless steel |
Base materials | Aluminium |
Minimum thickness of base material (steel) | 6 mm |
Thread diameter | 8 mm |
Tightening torque | 5 Nm |
Environmental conditions | Highly corrosive |
Fastener shank diameter | 5.8 mm |
Corrosion protection | Stainless steel, equivalent to SS316 |
Washer size | 12 mm |
Point type | Blunt tip |
For use with | SBT 4-A22 |
Max. tightening torque | 5 Nm |
Diameter (mm) | M8 |
Downloads
Name | Classification | Size |
---|---|---|
Certificate | 41 kB | |
Certificate | 434 kB | |
Certificate | 202 kB | |
Certificate | 494 kB | |
Certificate | 140 kB | |
Certificate | 165 kB | |
Certificate | 205 kB | |
User Guide | 1 MB | |
Best Practice | 23 MB | |
User Guide | 3 MB | |
User Guide | 794 kB | |
User Guide | 183 MB | |
User Guide | 56 MB | |
Certificate | 3 MB | |
User Guide | 997 kB | |
User Guide | 3 MB |
Accessories(11)
-
Threaded stud X-SEA-R 30 M8 adapter
-
Grating disc X-FCP-F 5/10
-
Grating disc X-FCP-R 5/10
-
Grating disc X-FCM-M 25/30
-
Grating disc X-FCM-M 35/40
-
Grating disc X-FCM-R 25/30
-
Grating disc X-FCM-R 45/50
-
Grating disc X-FCM-R 1 1/4
-
Depth gauge S-DG BT M8/7 Short 6
-
Depth gauge S-DG BT M8/7 Short 6
-
Stepped drill bit TS-BT 5.5-74 AL