Threaded screw-in stud made of stainless steel for multi-purpose fastenings on painted steel. The stud allows fast and easy single-operator installation with battery power onto coated steel base material. There is no through penetration and no rework of the coating required. Minimum base material thickness 6 mm. The system holds the relevant approvals for offshore and onshore environments and is suited for use in highly corrosive environment.
Threaded screw-in stud made of stainless steel for multi-purpose fastenings on painted steel. The stud allows fast and easy single-operator installation with battery driven tools onto coated steel base material. There is no through penetration and no rework of the coating required. Minimum base material thickness 6 mm. The system holds the relevant offshore and onshore approvals and is suited for use in highly corrosive environment. Supplied in a box containing: 100 x S-BT-MR studs, 100 x Hilti flange nuts, 1 x stepped drill bit TS-BT 5.5-74 S for carbon steel, 1 x check gauge and IFU (instructions for use)-manual. Oglaend System anti-vibration flange nuts can be ordered separately. This stud needs a separate Dept Gauge #2148575, not included in the S-BT starter kit.