Threaded stud S-BT-MR M8/7 SN 6
Article number: 2139172
Threaded screw-in stud made of stainless steel for multi-purpose fastenings on painted steel. The stud allows fast and easy single-operator installation with battery driven tools onto coated steel base material. There is no through penetration and no rework of the coating required. Minimum base material thickness 6 mm. The system holds the relevant offshore and onshore approvals and is suited for use in highly corrosive environment. Supplied in a box containing: 100 x S-BT-MR studs, 100 x Hilti flange nuts, 1 x stepped drill bit TS-BT 5.5-74 S for carbon steel, 1 x check gauge and IFU (instructions for use)-manual. Oglaend System anti-vibration flange nuts can be ordered separately.

Name | Value |
---|---|
Weight (kg) | 0,0 |
d Diameter (mm) | 8 mm |
Material composition | Stainless steel |
Base materials | Steel |
Minimum thickness of base material (steel) | 6 mm |
Thread diameter | 8 mm |
Tightening torque | 8 Nm |
Environmental conditions | Highly corrosive |
Fastener shank diameter | 5.8 mm |
Corrosion protection | Stainless steel, equivalent to SS316 |
Washer size | 10 mm |
Point type | Blunt tip |
For use with | SBT 4-A22 |
Max. tightening torque | 8 Nm |
Name | Classification | Size |
---|---|---|
|
Certificate | 40 KB |
|
Certificate | 424 KB |
|
Certificate | 198 KB |
|
Certificate | 482 KB |
|
Certificate | 137 KB |
|
Certificate | 162 KB |
|
Certificate | 200 KB |
|
Best Practice | 22152 KB |
|
Technical article | 2478 KB |
|
User Guide | 153032 KB |
|
User Guide | 54574 KB |
|
Certificate | 2766 KB |
|
User Guide | 1146 KB |