LOE cable ladder system
LOE is an economical low weight cable ladder system suitable for medium to light loads such as instrumentation, data & telecom cables and where cables have a bending radius less than 300 mm.
-
-
Cantilever arm UNO P-41-1
-
Splice connector OE/LOE100
-
Splice connector LOE55
-
Splice connector LOE75
-
Cantilever arm UNO U-41-2
-
Splice connector LOE100 HD
-
Cantilever arm notches Mekano 50
-
Expansion splice LOE55 x2
-
Splice connector LOE75 HD
-
Expansion splice TOE100 x2
-
Splice angle horizontal SPB-LB/LOE55 FX
-
Splice angle horizontal OE/LOE100 FX
-
Expansion splice LOE/TOE75 x2
-
Central support channel LOE/TOE
-
Hinge vertical SPB-LB/LOE55 FX
System Overview
LOE is an economical low weight cable ladder system suitable for medium to light loads.
LOE is an economical low weight cable ladder system suitable for medium to light loads such as instrumentation, data & telecom cables and where cables have a bending radius less than 300 mm. The design ensures quick and easy installation. Typical support distance is 2 m, and up to a maximum of 4 m for light loads. LOE is unsuitable for high voltage or heavy cables. In these cases, our OE cable ladder is highly recommended. The entire system is designed with no sharp edges to avoid damage to cables, and to improve H&S during installation. The LOE cable ladder system can be used in a variety of environments, and is complemented by a wide range of accessories for many applications.
Compatible systems
Data
CABLE |
Rail Height |
Loading Depth |
SWL 2 m |
SWL 3 m |
SWL 4 m |
Available |
Material thickness |
|
LOE55 |
55 |
24 |
200/176/- |
100/97/- |
31/25/- |
3 |
1.00 / 1.25 / - |
|
LOE75 |
75 |
46 |
181/304/295 |
104/150/115 |
54/79/62 |
3 |
1.00 / 1.25 / 1.00 |
|
LOE100 |
100 |
68 |
316/321/- |
188/217/- |
94/119/- |
3 |
1.25 / 1.50 / - |
|
SWL = Safe Working Load
Loading data according to IEC61537. The length of the end span must be reduced to 3/4 of the support spacing and with no splices on the end span.
Design details
Different heights (mm)
Different ladder heights offer several choices for efficient positioning of the loads and full optimisation of the area, including possibility for future expansion. D = Loading depth.
Available widths (mm)
200, 300, 400, 500 & 600.
Pre Slotted Rungs
The ladder rungs are spot welded to the side rails. The rungs are pre-slotted, enabling cable ties to be easily and efficiently attached.
Drainage holes
The design reduces the possibility for any liquids to permanently gather and pool. Material choices offered have been carefully considered in order to avoid corrosion whilst maintaining cost advantages.
Ladder installation
Slotted side rails with the flange facing inwards are ideally suited for quick and simple installation of equipment and support directly onto the side rail.
Downloads
Name | Classification | Size |
---|---|---|
Catalogue / Brochure | 715 KB | |
Catalogue / Brochure | 615 KB |