Threaded stud X-BT-MR M10/15 SN 8 OGL
Article number: 2217525
Threaded blunt tip stud made of stainless steel for multi-purpose fastenings on steel and stainless steel. The stud allows fast and easy single-operator installation with the BX 3-BT A22 Battery-actuated fastening tool. There is no through penetration and no rework of the coating required. Minimum base material thickness 8 mm. The system holds the relevant offshore and onshore approvals and is suited for use in highly corrosive environment. Supplied in a box containing: 100 x X-BT-MR studs, 1 x stepped drill bit TX-BT 4.7/7 for carbon steel, 1 x check gauge, 1 x protective cap for tool fastener guide and IFU (instructions for use)-manual. Please order OS anti-vibration flange nuts separately (#1371973).

Name | Value |
---|---|
Weight (kg) | 0.01 |
d Diameter (mm) | 10 mm |
Material composition | Stud: Equivalent to A4 (316) stainless steel. SN washer: S 31635 (X2CrNiMo 17-12-2, 1.4404). Sealing washer: elastomer black. |
Base materials | Steel, stainless steel |
Minimum thickness of base material (steel) | 8 mm |
Thread diameter | 10 mm |
Tightening torque | 20 Nm |
Environmental conditions | Highly corrosive |
For use with | DX 351 BT |
Name | Classification | Size |
---|---|---|
|
Certificate | 47 KB |
|
Certificate | 421 KB |
|
User Guide | 18623 KB |
|
User Guide | 1753 KB |
|
User Guide | 2058 KB |