Threaded stud S-BT electrical connector
Threaded screw-in stud made of stainless steel for use as an electrical connector for functional and protective bonding and grounding applications. For a maximum permanent current of 40 A and a maximum contact resistance of 5 mΩ. The stud allows fast and easy single-operator installation with battery driven tools. There is no through penetration and rework required. Minimum base material thickness 6 mm. The system holds the relevant electrical, offshore and onshore approvals and it is suited for the use in highly corrosive environment. Supplied in a box containing: 100 x S-BT-ER studs, 200 x nuts, 100 x lock washers, 1 x stepped drill bit TS-BT 5.5-74 S for carbon steel, 1 x check gauge and IFU (instructions for use)-manual.
Product variants
Characteristics
| Name | Value |
|---|---|
| Type | Threaded stud S-BT |
| Application area | Electrical |
| Material composition | Duplex stainless steel (1.4462) |
| Base materials | Steel |
| Minimum thickness of base material (steel) | 6 mm |
| Tightening torque | 8 Nm |
| Environmental conditions | Highly corrosive |
| Fastener shank diameter | 5.8 mm |
| Corrosion protection | Equivalent to A4 (316) stainless steel |
| Point type | Blunt tip |
| For use with | SBT 4-A22 |
| Max. tightening torque | 8 Nm |
Downloads
| Name | Classification | Size |
|---|---|---|
| Product Data Sheet | 9 MB | |
| User Guide | 1 MB | |
| Certificate | 41 kB | |
| Certificate | 434 kB | |
| Certificate | 202 kB | |
| Certificate | 494 kB | |
| Certificate | 140 kB | |
| Certificate | 165 kB | |
| Certificate | 205 kB | |
| Best Practice | 23 MB | |
| User Guide | 334 MB | |
| Certificate | 3 MB | |
| Certificate | 269 kB | |
| User Guide | 3 MB | |
| User Guide | 963 kB | |
| User Guide | 495 MB |