Threaded Stud S-BT-ER M10 HC 120 HL
OS item no.: 2346079
Threaded screw-in stud made of stainless steel for use as an electrical connector for functional and protective bonding and grounding applications. The stud allows fast and easy single-operator installation with battery driven tools. There is no through penetration and rework of the coating required. Minimum base material thickness 6mm. The system holds the relevant electrical, offshore and onshore approvals. Recommended maximal cross section of connected cable: 120 mm² / AWG 4.0.
Supplied in a box containing: 100 x "S-BT-ER HC HL threaded studs", 100 x "conductor discs", 100 x "lock washers", 100 x "nuts", 1 x "coating removal drill bit TS-BT 5.3 HC", 1 x "stepped drill bit TS-BT 5.3-65 S", 1 x check gauge and IFU (instructions for use)-manual.
Product variants
Filter product
Characteristics
| Name | Value |
|---|---|
| Weight (kg) | 0.040 |
| D Diameter (mm) | 10 |
| Type | Threaded stud S-BT HL |
| Application area | Electrical |
| Material composition | Stainless steel |
| Base materials | Steel |
| Minimum thickness of base material (steel) | 6 mm |
| Thread diameter | 10 mm |
| Tightening torque | See product data sheet |
| Environmental conditions | Highly corrosive |
| Fastener shank diameter | 5.8 mm |
| Corrosion protection | Highly corrosive |
| Washer size | 12 mm |
| Point type | Blunt tip |
| For use with | SBT 6-A22 |
| Max. tightening torque | See product data sheet |
| Diameter (mm) | M10 |
| ETIM class | EC003615 - Threaded nail |
Downloads
| Name | Classification | Size |
|---|---|---|
| Catalogue / Brochure | 7 MB | |
| Product Data Sheet | 4 MB | |
| Certificate | 2 MB | |
| Certificate | 543 kB | |
| Certificate | 409 kB | |
| Certificate | 718 kB | |
| User Guide | 6 MB | |
| Video | 201 MB | |
| Catalogue / Brochure | 7 MB | |
| Product Data Sheet | 4 MB | |
| Certificate | 2 MB | |
| Certificate | 543 kB | |
| Certificate | 409 kB | |
| Certificate | 718 kB | |
| User Guide | 6 MB | |
| Video | 201 MB |