Threaded Stud S-BT-ER M8/15 SN 6 HL
OS item no.: 2346073
Threaded screw-in stud made of stainless steel for use as an electrical connector for functional and protective bonding and grounding applications. The stud allows fast and easy single-operator installation with battery driven tools. There is no through penetration and rework required. Minimum base material thickness 6 mm. The system holds the relevant electrical, offshore and onshore approvals and it is suited for the use in highly corrosive environment. Recommended maximal cross section of connected cable: 10 mm².
To be used on steel base material for electrical connections (bonding and earthing/grounding).Supplied in a box containing: 100 x "S-BT-ER HL threaded studs", 200 x "nuts", 100 x "lock washers", 1 x "stepped drill bit TS-BT 5.3-65 S (for carbon steel)", and IFU (instructions for use)-manual.
Product variants
Characteristics
Name | Value |
---|---|
Weight (kg) | 0.020 |
D Diameter (mm) | 8 |
Type | Threaded stud S-BT HL |
Application area | Electrical |
Material composition | Stainless steel |
Base materials | Steel |
Minimum thickness of base material (steel) | 6 mm |
Thread diameter | 8 mm |
Tightening torque | See product data sheet |
Environmental conditions | Highly corrosive |
Fastener shank diameter | 5.8 mm |
Corrosion protection | Duplex stainless steel (1.4462) |
Washer size | 10 mm |
Point type | Blunt tip |
For use with | SBT 6-A22 |
Max. tightening torque | See product data sheet |
Diameter (mm) | M8 |
ETIM class | EC003615 - Threaded nail |
Downloads
Name | Classification | Size |
---|---|---|
Catalogue / Brochure | 7 MB | |
Product Data Sheet | 4 MB | |
Certificate | 2 MB | |
Certificate | 543 kB | |
Certificate | 409 kB | |
Certificate | 718 kB | |
User Guide | 5 MB | |
User Guide | 4 MB | |
Video | 201 MB | |
Catalogue / Brochure | 7 MB | |
Product Data Sheet | 4 MB | |
Certificate | 2 MB | |
Certificate | 543 kB | |
Certificate | 409 kB | |
Certificate | 718 kB | |
User Guide | 5 MB | |
User Guide | 4 MB | |
Video | 201 MB |