Threaded stud X-BT-GR M8/7 SN 8
Article number: #2194344
Threaded blunt tip stud made of stainless steel for grating fastenings on steel and stainless steel. The stud allows fast and easy single-operator installation with the BX 3-BT A22 Battery-actuated fastening tool. There is no through penetration and no rework of the coating required. Minimum base material thickness 8 mm. The system holds the relevant offshore and onshore approvals and is suited for use in highly corrosive environment.
Threaded blunt tip stud made of stainless steel for grating fastenings on steel and stainless steel. The stud allows fast and easy single-operator installation with the BX 3-BT A22 Battery-actuated fastening tool. There is no through penetration and no rework of the coating required. Minimum base material thickness 8 mm. The system holds the relevant offshore and onshore approvals and is suited for use in highly corrosive environment. Supplied in a box containing: 100 x X-BT GR studs, 1 x stepped drill bit TX-BT 4.7/7 for carbon steel, 1 x check gauge, 1 x protective cap for tool fastener guide and IFU (instructions for use)-manual. Order application appropriate grating fasteners separately.
Product variants
Filter product
Characteristics
Name | Value |
---|---|
Weight (kg) | 0.010 |
D Diameter (mm) | 8 mm |
Type | Threaded stud X-BT |
Application area | Grating fastening |
Material composition | Stud: Equivalent to A4 (316) stainless steel. SN washer: S 31635 (X2CrNiMo 17-12-2, 1.4404). Sealing washer: elastomer black. |
Base materials | Steel, stainless steel |
Minimum thickness of base material (steel) | 8 mm |
Thread diameter | 8 mm |
Tightening torque | 20 Nm |
Environmental conditions | Highly corrosive |
For use with | DX 351 BTG |
Diameter (mm) | M8 |
ETIM class | EC003615 - Threaded nail |
Downloads
Name | Classification | Size |
---|---|---|
User Guide | 19 MB | |
User Guide | 2 MB | |
Certificate | 48 kB | |
User Guide | 6 MB | |
User Guide | 2 MB |