Elec. connector S-BT-ER M10 HC 120
Threaded screw-in stud made of stainless steel for use as an electrical connector for functional and protective bonding and grounding applications. For a maximum permanent current of 269A and capable of withstanding short circuit up to 14’400A. The stud allows fast and easy single-operator installation with battery driven tools. There is no through penetration and rework of the coating required. Minimum base material thickness 6mm. The system holds the relevant electrical, offshore and onshore approvals. Supplied in a box containing: 100 x S-BT-ER studs, 100 x conductor discs, 100 x lock washers, 100 x nuts, 1 x coating removal drill bit, 1 x stepped drill bit TS-BT 5.5-74 S, 1 x check gauge and IFU (instructions for use)-manual.
Characteristics
| Name | Value |
|---|---|
| Weight (kg) | 0.100 |
| D Diameter (mm) | 8 mm |
| Type | Threaded stud S-BT |
| Application area | Electrical |
| Material composition | Duplex stainless steel (1.4462) |
| Base materials | Steel |
| Minimum thickness of base material (steel) | 6 mm |
| Thread diameter | 8 mm |
| Tightening torque | 8 Nm |
| Environmental conditions | Highly corrosive |
| Fastener shank diameter | 5.8 mm |
| Corrosion protection | Equivalent to A4 (316) stainless steel |
| Washer size | 10 mm |
| Point type | Blunt tip |
| For use with | SBT 4-A22 |
| Max. tightening torque | 8 Nm |
| Diameter (mm) | M10 |
