Threaded stud S-BT-GF M8/7 AN 6

OS item no.: 2140527

Threaded screw-in stud made of stainless steel / hot dip galvanised for grating fastenings on painted steel. The stud allows fast and easy single-operator installation with battery driven tools onto coated steel base material. There is no through penetration and no rework of the coating required. Minimum base material thickness 6 mm. The system holds the relevant offshore and onshore approvals and is suited for use in highly corrosive environment.

Threaded screw-in stud made of carbon steel for grating fastenings on painted steel. The stud allows fast and easy single-operator installation with battery driven tools onto coated steel base material. There is no through penetration and no rework of the coating required. Minimum base material thickness 6 mm. The system holds the relevant offshore and onshore approvals and is suited for use in mildly corrosive environment. Supplied in a box containing: 100 x S-BT-GF studs, 1 x stepped drill bit TS-BT 5.5-74 S for carbon steel, 1 x check gauge and IFU (instructions for use)-manual. Order application appropriate grating fasteners separately.

Characteristics

Name	Value
Weight (kg)	0.010
D Diameter (mm)	8 mm
Type	Threaded stud S-BT
Application area	Grating fastening
Material composition	Carbon steel
Base materials	Steel
Minimum thickness of base material (steel)	6 mm
Thread diameter	8 mm
Tightening torque	8 Nm
Environmental conditions	Mildly corrosive
Fastener shank diameter	5.8 mm
Corrosion protection	Duplex coated
Washer size	10 mm
Point type	Blunt tip
For use with	SBT 4-A22
Max. tightening torque	8 Nm
Diameter (mm)	M8