Threaded blunt tip stud made of stainless steel for multi-purpose fastenings on steel and stainless steel. The stud allows fast and easy single-operator installation with the BX 3-BT A22 Battery-actuated fastening tool. There is no through penetration and no rework of the coating required. Minimum base material thickness 8 mm. The system holds the relevant offshore and onshore approvals and is suited for use in highly corrosive environment.
Threaded blunt tip stud made of stainless steel for multi-purpose fastenings on steel and stainless steel. The stud allows fast and easy single-operator installation with the BX 3-BT A22 Battery-actuated fastening tool. There is no through penetration and no rework of the coating required. Minimum base material thickness 8 mm. The system holds the relevant offshore and onshore approvals and is suited for use in highly corrosive environment. Supplied in a box containing: 100 x X-BT MR M6/10 studs, 100 x Hilti flange nuts (to be discarded for Grating and Oglaend Multipurpose applications) 1 x stepped drill bit TX-BT 4.7/7 for carbon steel, 1 x check gauge, 1 x protective cap for tool fastener guide and IFU (instructions for use)-manual.