Miscellaneous support
-
-
U-bolts with nuts
-
Cantilever arm 30
-
Cast-in profile 11x35
-
Angle bracket 50x50x5 M6
-
Angle iron CW 7x16mm M6 3m
-
U-bolt
-
Cantilever arm 35
-
T-bolt CI M10x30
-
Angle bracket 50x50x3 M6/8
-
Angle iron CW/LW 7x16mm M6/M10 3m
-
U-bolt OPS
-
Cantilever arm Mekano 38
-
Nailplate and nails
-
Magnet Ø88 M8
-
Angle bracket 50x50x5 M6/10
System Overview
Miscellaneous support solutions
Perforated profiles, angle brackets, magnets, safety hooks, concrete support and cantilever arms.
Design details
Cantilever Arms
Both our Mekano® multidiscipline support system and our UNO support system are complimented by a range of simple to install cantilever support arms which can be used for supporting Cable Ladders and Cable Trays. These are available in a range of convenient widths and in materials to match the Cable Ladders and Trays. They can also be fixed directly to the wall.
Concrete Insert Rail
Our innovative Concrete Insert Rail is a channel which is attached to the concrete mould prior to pouring. When the mould is removed, the result is a strong, flexible support rail system encased in the concrete wall, ceiling or floor. The rail system can be used for direct support by attaching cantilever arms, or can be used for supporting a wide range of brackets and accessories.
Concrete Element Support
Starter brackets suitable for all types of industrial and commercial buildings that use hollow concrete sections. The starter brackets are inserted in from above and then cast in concrete during the sealing process. Following this simple and fast installation method, the starter brackets are ready for equipment to be installed. Each bracket has a load capacity of up to 1000 kg.
Videos
Concrete Insert Rail
Our innovative Concrete Insert Rail is a channel which is attached to the concrete mould prior to pouring. When the mould is removed, the result is a strong, flexible support rail system encased in the concrete wall, ceiling or floor.
Starter Bracket for Hollow Concrete Section Elements
The brackets are inserted in from above and then cast in concrete during the sealing process. Following this simple and fast installation method, the starter brackets are ready for equipment to be installed. Each bracket has a load capacity of up to 1000 kg. The starter brackets are suitable for all types of industrial and commercial buildings that use hollow concrete sections.